L2Vpn Control-Word - Juniper JUNOSE SOFTWARE 11.2.X - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010 Command Reference Manual
Software for e series broadband services routers command reference a to m
Hide thumbs
Also See for JUNOSE SOFTWARE 11.2.X - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010:
- Manual (282 pages)
Table of Contents
Advertisement
JunosE 11.2.x Command Reference Guide A to M
l2vpn control-word
Syntax
Release Information
Description
Options
Mode
Related Topics
1192
[ no | default ] l2vpn l2VpnName control-word
Command introduced in JunosE Release 8.1.0.
Indicates that the local preference is to use the control word for the layer 2 packets
encapsulated in the MPLS packets that are sent to the remote PE router. The no version
indicates that the local preference is to not use the control word for the layer 2 packets
encapsulated in the MPLS packets that are sent to the remote PE router. The default
version accepts the preference determined by the interface stack on which the MPLS
interface is stacked.
l2VpnName—Name of the VPWS instance
Global Configuration
Configuring an L2VPN Instance in the JunosE BGP and MPLS Configuration Guide
Copyright © 2010, Juniper Networks, Inc.
Advertisement
Table of Contents
Need help?
Do you have a question about the JUNOSE SOFTWARE 11.2.X - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010 and is the answer not in the manual?
Questions and answers