Committed-Burst - Juniper JUNOSE SOFTWARE 11.2.X - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010 Command Reference Manual

committed-burst

Syntax
Release Information
Description
Options
Mode
Related Topics
Copyright © 2010, Juniper Networks, Inc.
committed-burst { size | millisecond milliseconds }
no committed-burst
Command introduced before JunosE Release 7.1.0.
milliseconds variable added in JunosE Release 8.1.0.
Sets the committed burst for a rate limit profile. The no version restores the default value,
100 ms; if 100ms is less than 8K, then 8K (8192).
size—Size in bytes in the range 1–4294967295
milliseconds—Milliseconds in the range 1–10000
Rate Limit Profile Configuration
Creating a Two-Rate Rate-Limit Profile
Chapter 4: C Commands
441