Mpls Ldp Advertise-Labels - Juniper JUNOSE SOFTWARE 11.2.X - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010 Command Reference Manual
Software for e series broadband services routers command reference a to m
Hide thumbs
Also See for JUNOSE SOFTWARE 11.2.X - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010:
- Manual (282 pages)
Table of Contents
Advertisement
JunosE 11.2.x Command Reference Guide A to M
mpls ldp advertise-labels
Syntax
Release Information
Description
Options
Mode
1342
mpls ldp advertise-labels { host-only | for routeAccessList [ to neighborAccessList ] |
interface interfaceType interfaceSpecifier }
no mpls ldp advertise-labels { policy-list | host-only |
for routeAccessList [ to neighborAccessList ]
| interface interfaceType interfaceSpecifier }
Command introduced before JunosE Release 7.1.0.
Controls the distribution of incoming labels advertised by LDP. The no version halts
advertisement of all incoming labels or the specified labels.
host-only—Advertises only labels for host routes (routes with a 32-bit mask)
routeAccessList—Name of access list identifying routes for which label advertisement
is permitted or denied
neighborAccessList—Name of access list identifying neighbors to which the LSR
advertises labels
interfaceType—Interface type; see "Interface Types and Specifiers" on page 5
interfaceSpecifier—Particular interface; format varies according to interface type; see
Interface Types and Specifiers on page 5
policy-list—Deletes all lists configured with the for routeAccessList option
Global Configuration
Copyright © 2010, Juniper Networks, Inc.
Advertisement
Table of Contents
