Ip Dhcp-Local Auth Include - Juniper JUNOSE SOFTWARE 11.2.X - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010 Command Reference Manual
Software for e series broadband services routers command reference a to m
Hide thumbs
Also See for JUNOSE SOFTWARE 11.2.X - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010:
- Manual (282 pages)
Table of Contents
Advertisement
ip dhcp-local auth include
Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
[ no ] ip dhcp-local auth include { circuit-identifier | circuit-type | mac-address | option82
| virtual-router-name }
Command introduced in JunosE Release 7.1.0.
Includes optional information as part of the locally configured username for a DHCP
standalone mode client. In standalone mode, the username is presented to AAA in an
authentication request. The no version removes the specified optional information.
circuit-identifier—Specifies the circuit identifier of the interface on which the DHCP
client's request was received
circuit-type—Specifies the circuit type of the interface on which the DHCP client's
request was received
mac-address—Specifies the DHCP client's MAC address
option82—Specifies the DHCP client's Option 82 value
virtual-router-name—Specifies the DHCP local server's virtual router name
Global Configuration
Chapter 10: I Commands
763
Advertisement
Table of Contents
