local ip network
Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
local ip network ipNetwork ipMask
no local ip network
Command introduced in JunosE Release 7.3.0.
Specifies networks that are reachable through the IPSec tunnel. You can configure up
to 16 networks for this method of " split-tunneling." The no version removes the specified
network from the reachable list.
ipNetwork—IP network reachable through the secure connection
ipMask—IPv4 subnetwork mask for the IP network
IPSec Tunnel Profile Configuration
Chapter 12: L Commands
1229