Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual page 2094

Alcatel-lucent omniswitch 6850-48: reference guide
Hide thumbs Also See for OmniSwitch 6850-48:
Table of Contents

Advertisement

output definitions (continued)
Override Interval
TBit field
Gen ID present
Gen ID Value
BiDir Capable
DR Priority Present
DR priority
State Refresh Capable
Secondary Addresses
Release History
Release 6.3.1; command was introduced.
Related Commands
N/A
MIB Objects
alaPimNeighborTable
alaPimNeighborAddress
alaPimNeighborIfIndex
alaPimNeighborUpTime
alaPimNeighborExpiryTime
alaPimNeighborLanPruneDelayPresent
alaPimNeighborPropagationDelay
alaPimNeighborTBit
alaPimNeighborGenerationIDPresent
alaPimNeighborGenerationIDValue
alaPimNeighborBidirCapable
alaPimNeighborDRPriorityPresent
alaPimNeighborDRPriority
alaPimNeighborSRCapable
page 30-106
The current Override Interval of the LAN prune-delay option received
from this neighbor. This value is used to avoid synchronization of over-
ride messages when multiple downstream routers share a multi-access
link. The sending of override messages is delayed at random time inter-
vals. The amount of randomization used by the neighboring router is
dictated by this number. Values may range from 0 to 65535. A value of
0 indicates that no LAN prune-delay option was received from this
neighbor.
The value of the Tbit field of the LAN prune-delay option received
from this neighbor. The Tbit specifies the ability of the neighbor to dis-
able Join suppression.
Specifies whether this neighbor is using Generation ID option. Options
include true or false.
The value of the Generation ID in the last PIM Hello message received
from this neighbor.
Specifies whether this neighbor is using the Bidirectional-PIM Capable
option.
Displays whether the neighbor is using the Designated Router option.
Options include true or false.
The value of the Designated Router Priority in the last PIM Hello mes-
sage received from this neighbor.
Displays whether the neighbor is capable of receiving State Refresh
messages. Options include true or false.
The secondary IPv6 address of this PIM neighbor.
OmniSwitch CLI Reference Guide
PIM Commands
June 2012

Advertisement

Table of Contents
loading

Table of Contents