Subaru IMPREZA GD 2007 Series Manual page 3656

asieps_tobira_IM_US.book 3 ページ ２０１２年１月１７日 火曜日 午後３時４８分
2. Datum Points
A: LOCATION
NOTE:
• Datum points are specified for body repair.
• Guide holes, locators, and indents are provided to facilitate panel replacement and to increase alignment
accuracy.
• Both right and left reference points are symmetrical.
1. WAGON MODEL/SEDAN MODEL
(2)
(1)
(5)
(1)
(1) Radiator attaching hole 12 mm
(0.47 in) dia. (symmetrical)
(2) Fender attaching hole 7 mm
(0.28 in) dia. (symmetrical)
(3) Fender attaching hole 10 mm
(0.39 in) dia. (symmetrical)
(4) Front hood hinge attaching hole
12 mm (0.47 in) dia. (symmetrical)
(5) Radiator panel side gauge hole
20 mm (0.79 in) dia. (symmetrical)
(7) Fender attaching hole 9.5 mm
(0.37 in) dia. (symmetrical)
(8) Gauge hole 12 mm (0.47 in) dia.
(symmetrical)
(9) Front suspension crossmember
attaching hole 12.4 mm (0.488 in)
dia. (symmetrical)
Datum Points
(12)
(74)
(24)
(4)
(3)
(10)
(9)
(8)
(2)
(7)
(5)
(10) Bracket module center gauge hole
6 mm (0.24 in) dia.
(vehicle center)
(12) Front glass attaching hole RH
6.5 mm (0.256 in) dia.
LH 6.5 × 10 mm (0.256 × 0.39 in)
dia.
(18) Fender attaching hole 12 mm
(0.47 in) dia. (symmetrical)
(19) Fender attaching hole 12 mm
(0.47 in) dia. (symmetrical)
(20) Outer panel center pillar gauge
hole 12 mm (0.47 in) dia.
(symmetrical)
(21) Outer panel center pillar gauge
hole 12 mm (0.47 in) dia.
(symmetrical)
BS-3
(70)
(12)
(20)
(21)
(71)
(18)
(4)
(3)
(75)
(19)
(22) Weather strip patch attaching hole
5.2 mm (0.205 in) dia.
(symmetrical)
(24) Roof panel repair locator hollow
(62) Belt anchor attaching hole 11 mm
(0.43 in) dia. (symmetrical)
(70) Trim clip attaching hole 8.5 mm
(0.335 in) dia. (Symmetrical)
(71) Harness clip attaching hole 7 mm
(0.28 in) dia. (symmetrical)
(73) Harness clip attaching hole 7 mm
(0.28 in) dia. (symmetrical)
(74) Trim clip attaching hole 10 mm
(0.39 in) dia. (symmetrical)
(75) Insulator attaching hole 8 mm
(0.31 in) dia. (symmetrical)
BODY STRUCTURE
(22)
(73)
(62)
BS-01597