Subaru IMPREZA GD 2007 Series Manual page 3679

asieps_tobira_IM_US.book 4 ページ ２０１２年１月１７日 火曜日 午後３時４８分
COMMUNICATION SYSTEM
3. Horn
A: REMOVAL
1) Disconnect the ground cable from the battery.
2) Remove the front bumper. <Ref. to EI-24, RE-
MOVAL, Front Bumper.>
3) Remove the horn bracket mounting bolt (A).
4) Disconnect the harness connector and remove
the horn assembly (B).
(A)
(B)
B: INSTALLATION
Install in the reverse order of removal.
C: INSPECTION
With 12 V direct current supply between horn termi-
nal and case ground, check that the horn sounds
properly.
Horn
(A)
COM00042
COM00003
COM-4