Subaru IMPREZA GD 2007 Series Manual page 3736

asieps_tobira_IM_US.book 11 ページ ２０１２年１月１７日 火曜日 午後３時４８分
10.Antenna Amplifier
A: REMOVAL
1. SEDAN
1) Disconnect the ground cable from the battery.
2) Remove the rear pillar upper trim. <Ref. to EI-52,
SEDAN MODEL, REMOVAL, Rear Quarter Trim.>
3) Disconnect the harness connectors and termi-
nals.
4) Remove the fitting screws and bolts, and detach
the antenna amplifier.
2. WAGON
1) Disconnect the ground cable from the battery.
2) Remove the rear quarter upper trim and roof
trim. <Ref. to EI-55, WAGON MODEL, REMOVAL,
Roof Trim.> <Ref. to EI-52, WAGON MODEL, RE-
MOVAL, Rear Quarter Trim.>
3) Disconnect the harness connectors and termi-
nals.
4) Remove the fitting screws and detach the anten-
na amplifier.
B: INSTALLATION
Install in the reverse order of removal.
Antenna Amplifier
C: INSPECTION
Measure the resistance of antenna amplifier.
• Sedan model
(3)
(1)
• Wagon model
ET-00164
Terminal No.
1 — a and Amplifier body
1 — b and Amplifier body
2 — a and Amplifier body
3 and amplifier body
4 — a and Amplifier body
4 — b and Amplifier body
ET-00059
ET-11
ENTERTAINMENT
(1)-a
(2)-a
(1)-b
(2)
ET-00163
(1)
(2)-a
(2)
(4)
ET-00062
Standard
100 kΩ or more
Less than 1 Ω
100 kΩ or more
100 kΩ or more
100 kΩ or more
Less than 1 Ω
(1)-a
(1)-b
(4)-a
(4)-b