Subaru IMPREZA GD 2007 Series Manual page 3690

asieps_tobira_IM_US.book 9 ページ ２０１２年１月１７日 火曜日 午後３時４８分
7. Neutral Position Switch
A: REMOVAL
1) Disconnect the ground cable from the battery.
2) Disconnect the connector from the neutral posi-
tion switch, and remove the switch.
5MT model :
<Ref. to 5MT-35, BACK-UP LIGHT SWITCH AND
NEUTRAL POSITION
Switches and Harness.>
6MT model :
<Ref. to 6MT-43, REMOVAL, Neutral Position
Switch.>
B: INSTALLATION
Install in the reverse order of removal.
C: INSPECTION
Measure the resistance of neutral position switch.
• Non-turbo model
Gear shift position Terminal No.
Neutral position
1 and 2
Other positions
• Turbo model
Gear shift position Terminal No.
Neutral position
1 and 3
Other positions
Neutral Position Switch
SWITCH, REMOVAL,
2 1
MT-00110
Specified resistance
Less than 1 Ω
1 MΩ or more
2 1
4 3
MT-00111
Specified resistance
Less than 1 Ω
1 MΩ or more
CC-9
CRUISE CONTROL SYSTEM
• STI model
Gear shift position Terminal No.
Neutral position
2 and 5
Other positions
If NG, replace the neutral position switch.
3 2 1
6 5 4
MT-00947
Standard
Less than 1 Ω
1 MΩ or more