Subaru IMPREZA GD 2007 Series Manual page 3688

asieps_tobira_IM_US.book 7 ページ ２０１２年１月１７日 火曜日 午後３時４８分
5. Clutch Switch
A: REMOVAL
1) Disconnect the ground cable from the battery.
2) Disconnect the connector from the clutch switch,
and then remove the switch. <Ref. to CL-30, RE-
MOVAL, Clutch Pedal.>
B: INSTALLATION
Install in the reverse order of removal.
C: INSPECTION
Measure the clutch switch resistance.
Switch Pedal
Released
Clutch
Depressed
If NG, replace the clutch switch.
Clutch Switch
CC-00023
Terminal No. Standard
Less than 1 Ω
1 and 2
1 and 2 1 MΩ or more
CC-7
CRUISE CONTROL SYSTEM