Subaru IMPREZA GD 2007 Series Manual page 3737

asieps_tobira_IM_US.book 12 ページ ２０１２年１月１７日 火曜日 午後３時４８分
ENTERTAINMENT
11.Noise Suppressor
A: REMOVAL
1. SEDAN
1) Disconnect the ground cable from the battery.
2) Remove the rear pillar upper trim. <Ref. to EI-52,
SEDAN MODEL, REMOVAL, Rear Quarter Trim.>
3) Remove the rear shelf trim. <Ref. to EI-58, RE-
MOVAL, Rear Shelf Trim.>
4) Disconnect the feeder cord connector from an-
tenna amplifier.
5) Disconnect the harness connector of noise sup-
pressor from terminal on glass antenna.
6) Remove the harness clip.
7) Remove the fitting nuts and detach the noise
suppressor.
2. WAGON
1) Disconnect the ground cable from the battery.
2) Remove the rear gate trim. <Ref. to EI-57, RE-
MOVAL, Rear Gate Trim.>
3) Disconnect connector from the noise suppres-
sor.
4) Remove the fitting nuts and detach the noise
suppressor.
B: INSTALLATION
Install in the reverse order of removal.
Noise Suppressor
ET-00063
ET-00064
ET-12