Toyota Tundra 2005 Service - Repair - Maintenance page 2310

MANUAL TRANSMISSION (RA60)
9.
(a)
(b)
(c)
HINT:
Make sure that the shift fork shaft No.1, No.2 and No.4 are in
the neutral position.
D14007
10.
Install the shift fork No.2 and No.3 with 2 new bolts.
D14004
− CONTROL SHAFT ASSEMBLY
INSTALL SHIFT FORK SHAFT NO.3
Apply MP grease to the interlock pin No.2 and No.3, and
install them to the interlock bracket.
Install the spring and ball to the interlock bracket.
Install the shift fork shaft No.1 to the interlock bracket.
INSTALL SHIFT FORK NO.2 AND NO.3
Torque: 19.5 N·m (200 kgf·cm, 14 ft·lbf)
MT−67