Toyota Tundra 2005 Service - Repair - Maintenance page 2321

AUTOMATIC TRANSMISSION (A750E, A750F)
Lock Washer
− PARK/NEUTRAL POSITION (PNP) SWITCH
PARK/NEUTRAL POSITION (PNP)
SWITCH
ON−VEHICLE REPAIR
1. DISCONNECT PARK/NEUTRAL POSITION SWITCH
CONNECTOR
2. REMOVE PARK/NEUTRAL POSITION SWITCH
(a) Pry off the lock washer and remove the nut.
(b) Remove the bolt and park/neutral position switch.
3. INSTALL PARK/NEUTRAL POSITION SWITCH
(a) Install the park/neutral position switch with the bolt.
Torque: 13 N·m (130 kgf·cm, 10 ft·lbf)
(b) Install a new lock washer and the nut.
Torque: 6.9 N·m (70 kgf·cm, 61 in.·lbf)
(c) Bend the claws on the lock washer to stake the nut.
D12667
(d) Adjust the park/neutral position switch
(See page
4. CONNECT PARK/NEUTRAL POSITION SWITCH CON-
NECTOR
DI−952 or DI−1117).
AT−11
AT13O−01