MANUAL TRANSMISSION (RA60)
5.
(a)
D14011
(b)
D14012
6.
(a)
(b)
D14013
7.
Remove the shift fork shaft No.4, ball and spring.
D14014
8.
(a)
D14015
−
CONTROL SHAFT ASSEMBLY
REMOVE SHIFT HEAD NO.2 AND SHIFT FORK NO.1
Using a pin punch (5 mm (0.20 in.)) and hammer, tap out
the slotted pin.
Remove the shift head No.2 and shift fork No.1.
REMOVE SHIFT FORK NO.4
Using a pin punch (5 mm (0.20 in.)) and hammer, tap out
the slotted pin.
Remove the shift fork No.4.
REMOVE SHIFT FORK SHAFT NO.4
REMOVE SHIFT ARM
Using a screwdriver, remove the E−ring.
MT−63