Arp Timeout - Dell S6100 Configuration Manual

Version
8.3.1.0
Usage Information Retries are 20 seconds apart.
Related Commands
•

arp timeout

Set the time interval for an ARP entry to remain in the ARP cache.
Syntax arp timeout minutes
Parameters
minutes
Defaults 240 minutes (4 hours)
Command Modes INTERFACE
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version
9.10(0.1)
9.10(0.0)
9.10(0.0)
9.8(2.0)
9.8(1.0)
9.8(0.0P5)
9.8(0.0P2)
9.7(0.0)
9.2(1.0)
9.0.2.0
8.3.19.0
8.3.11.1
8.3.7.0
8.1.1.0
7.6.1.0
7.5.1.0
Description
Introduced.
show arp retries — display the configured number of ARP retries.
Enter the number of minutes. The range is from 0 to 35790. The default is 240 minutes.
Description
Introduced on the S6010-ON and S4048T-ON.
Introduced on the S3148.
Introduced on the S6100–ON.
Introduced on the S3100 series.
Introduced on the Z9100–ON.
Introduced on the S4048-ON.
Introduced on the S3048-ON.
Introduced on the S6000-ON.
Introduced on the Z9500.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the E-Series.
Introduced on the S-Series.
Introduced on the C-Series.
IPv4 Routing 747