Clear Ip Msdp Sa-Cache - Dell S6100 Configuration Manual

Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version
9.10(0.0)
9.8(1.0)
9.8(0.0P5)
9.8(0.0P2)
9.7(0.0)
9.5(0.1)
9.0.2.0
8.3.19.0
8.3.11.1
8.3.7.1
6.2.1.1

clear ip msdp sa-cache

Clears the entire source-active cache, the source-active entries of a particular multicast group, rejected, or local source-active entries.
Syntax clear ip msdp sa-cache [group-address | rejected-sa | local]
Parameters
group-address
rejected-sa
local
Defaults Without any options, this command clears the entire source-active cache.
Command Modes EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version
9.10(0.0)
9.8(1.0)
9.8(0.0P5)
Description
Introduced on the S6100–ON.
Introduced on the Z9100–ON.
Introduced on the S4048-ON.
Introduced on the S3048-ON.
Introduced on the S6000-ON.
Introduced on the Z9500.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced
Enter the group IP address in dotted decimal format (A.B.C.D.).
Enter the keywords rejected-sa to clear the cache source-active entries that are
rejected because the RPF check failed, an SA filter or limit is configured, the RP or MSDP
peer is unreachable, or because of a format error.
Enter the keyword local to clear out local PIM advertised entries. It applies the
redistribute filter (if present) while adding the local PIM SA entries to the SA cache.
Description
Introduced on the S6100–ON.
Introduced on the Z9100–ON.
Introduced on the S4048-ON.
Multicast Source Discovery Protocol (MSDP) 985