Show Mac Learning-Limit - Dell S6100 Configuration Manual

Version
9.2(1.0)
9.0.2.0
8.3.19.0
8.3.11.1
8.3.7.0
8.3.1.0
7.7.1.0
pre-6.2.1.1
Example
Dell# show mac-address-table aging-time
Mac-address-table aging time : 1800
Dell#
Related Commands
•

show mac learning-limit

Display MAC address learning limits set for various interfaces.
Syntax show mac learning-limit [violate-action] [detail] [interface interface]
Parameters
violate-action
detail
interface interface
Command Modes
•
932 Layer 2
Description
Introduced on the Z9500.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Added the vlan option on the E-Series.
Introduced on the C-Series and S-Series.
Introduced on the E-Series.
show mac-address-table — display the current MAC address configuration.
(OPTIONAL) Enter the keywords violate-action to display the MAC learning limit
violation status.
(OPTIONAL) Enter the keyword detail to display the MAC learning limit in detail.
(OPTIONAL) Enter the keyword interface with the following keywords and the
interface information:
• For a port channel interface, enter the keywords port-channel then a number.
• For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet then
the stack/slot/port/subport information.
• For a 25-Gigabit Ethernet interface, enter the keyword twentyFiveGigE then the
stack/slot/port/subport information.
• For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE then the stack/
slot/port[/subport] information.
• For a 50-Gigabit Ethernet interface, enter the keyword fiftyGigE then the stack/
slot/port/subport information.
• For a 100-Gigabit Ethernet interface, enter the keyword hundredGigE then the
stack/slot/port information.
EXEC