Match Community - Dell S6100 Configuration Manual

Command Modes ROUTE-MAP
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version
9.10(0.0)
9.8(1.0)
9.8(0.0P5)
9.8(0.0P2)
9.7(0.0)
9.2(1.0)
9.0.2.0
8.3.19.0
8.3.11.1
8.3.7.0
8.1.1.0
7.8.1.0
7.6.1.0
7.5.1.0
pre-6.1.1.0
Related Commands
•

match community

To match routes that have a certain COMMUNITY attribute in their BGP path, configure a filter.
Syntax match community community-list-name [exact]
To delete a community match filter, use the no match community command.
Parameters
community-list-
name
exact
Defaults Not configured.
Command Modes ROUTE-MAP
Description
Introduced on the S6100-ON.
Introduced on the Z9100–ON.
Introduced on the S4048-ON.
Introduced on the S3048-ON.
Introduced on the S6000–ON.
Introduced on the Z9500.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the E-Series.
Increased the name string to accept up to 140 characters. Prior to 7.8.1.0, names are up to
16 characters long.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
set as-path — add information to the BGP AS_PATH attribute.
Enter the name of a configured community list.
(OPTIONAL) Enter the keywords exact to process only those routes with this
community list name.
Access Control Lists (ACL) 263