Dell S6100 Configuration Manual page 689

Version
9.0.2.0
8.3.19.0
8.3.11.1
8.5.1.0
8.3.7.0
8.1.1.0
7.6.1.0
7.5.1.0
pre-Version 6.2.1.0
Usage Information In the Example, the delta column displays changes since the last screen refresh.
The following are the monitor command menu options.
Key
systest-3
monitor time
time
m
c
b
r
l
a
T
t
q
Example (Single
systest-3 Monitor time: 00:00:06 Refresh Intvl.: 2s Time: 03:26:26
Interface)
Interface: te 1/1/3/1, Enabled, Link is Up, Linespeed is 10000 Mbit
Traffic statistics:
Over 64B packets:
Over 127B packets:
Over 255B packets:
Over 511B packets:
Over 1023B packets:
Description
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Added support for 4-port 40G line cards on the E-Series.
Introduced on the S4810.
Introduced on the E-Series.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
Description
Displays the host name assigned to the system.
Displays the amount of time since the monitor interface command was entered.
Displays the amount of time the chassis is up (since last reboot).
Change the view from a single interface to all interfaces on the line card or visa-versa.
Refresh the view.
Change the counters displayed from Packets on the interface to Bytes.
Change the [delta] column from change in the number of packets/bytes in the last
interval to rate per second.
Change the view to the next interface on the line card, or if in line card mode, the next
line card in the chassis.
Change the view to the previous interface on the line card, or if in line card mode, the
previous line card in the chassis.
Increase the screen refresh rate.
Decrease the screen refresh rate.
Return to the CLI prompt.
Input bytes:
Output bytes: 606915800
Input packets:
Output packets:
64B packets:
Current Rate
9069828 43 Bps
43 Bps
54001 0 pps
9401589 0 pps
67 0 pps
49166 0 pps
350 0 pps
1351 0 pps
286 0 pps
2781 0 pps
Delta
86
86
1
1
0
1
0
0
0
0
Interfaces 689