Clear Ip Igmp Snooping Groups - Dell S6100 Configuration Manual

Hide thumbs Also See for S6100:
Table of Contents

Advertisement

When enabled, IGMP snooping Querier periodically sends general queries with an IP source address of the VLAN interface. If it receives
a general query on any of its VLAN member, it checks the IP source address of the incoming frame.
If the IP SA in the incoming IGMP general query frame is lower than the IP address of the VLAN interface, the switch disables its IGMP
snooping Querier functionality.
If the IP SA of the incoming IGMP general query is higher than the VLAN IP address, the switch continues to work as an IGMP
snooping Querier.

clear ip igmp snooping groups

Clear snooping entries from the group cache table.
Syntax
clear ip igmp snooping groups [group-address interface | interface]
Parameters
group-address
interface interface
Command Modes
EXEC
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version
9.10(0.0)
9.8(1.0)
9.8(0.0P5)
9.8(0.0P2)
9.7(0.0)
Usage Information
IGMP commands accept only non-VLAN interfaces — specifying VLAN does not yield results.
(OPTIONAL) Enter the IP multicast group address in dotted decimal format.
Enter the following keywords and the interface information:
For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet then
the stack/slot/port/subport information.
For a 25-Gigabit Ethernet interface, enter the keyword twentyFiveGigE then the
stack/slot/port/subport information.
For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE then the stack/
slot/port[/subport] information.
For a 50-Gigabit Ethernet interface, enter the keyword fiftyGigE then the stack/
slot/port/subport information.
For a 100-Gigabit Ethernet interface, enter the keyword hundredGigE then the
stack/slot/port information.
For a port channel interface, enter the keywords port-channel then a number.
Description
Introduced on the S6100–ON.
Introduced on the Z9100–ON.
Introduced on the S4048-ON.
Introduced on the S3048-ON.
Introduced on S-Series and Z–Series.
Internet Group Management Protocol (IGMP)
653

Advertisement

Table of Contents
loading

Table of Contents