Neighbor Advertisement-Interval - Dell S6100 Configuration Manual

Version
9.2(1.0)
9.0.2.0
8.3.19.0
8.3.11.1
8.3.8.0
Related Commands
•

neighbor advertisement-interval

Set the advertisement interval between BGP neighbors or within a BGP peer group.
Syntax neighbor {ip-address | peer-group-name} advertisement-interval seconds
To return to the default value, use the no neighbor {ip-address | peer-group-name}
advertisement-interval command.
Parameters
ip-address
peer-group-name
seconds
Defaults
•
•
Command Modes ROUTER BGP
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version
9.10(0.0)
9.8(1.0)
9.8(0.0P5)
9.8(0.0P2)
9.7(0.0)
9.2(1.0)
9.0.2.0
8.3.19.0
Description
Introduced on the Z9500.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
bgp add-path — allow the advertisement of multiple paths for the same address prefix without the new paths
implicitly replacing any previous ones.
(OPTIONAL) Enter the IP address of the neighbor in dotted decimal format.
Enter the name of the peer group to set the advertisement interval for all routers in the
peer group.
Enter a number as the time interval, in seconds, between BGP advertisements. The range
is from 0 to 600 seconds. The default is 5 seconds for internal BGP peers and 30
seconds for external BGP peers.
seconds = 5 seconds (internal peers)
seconds = 30 seconds (external peers)
Description
Introduced on the S6100-ON.
Introduced on the Z9100–ON.
Introduced on the S4048-ON.
Introduced on the S3048-ON.
Introduced on the S6000–ON.
Introduced on the Z9500.
Introduced on the S6000.
Introduced on the S4820T.
Border Gateway Protocol 379