Show Config - Dell S6100 Configuration Manual

permit
any
ip-prefix /nn
ge min-prefix-
length
le max-prefix-length (OPTIONAL) Enter the keyword le and then enter the maximum prefix length, which is a
bitmask number
Defaults Not configured.
Command Modes PREFIX-LIST
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version
9.10(0.0)
9.8(1.0)
9.8(0.0P5)
9.8(0.0P2)
9.7(0.0)
9.2(1.0)
9.0.2.0
8.3.19.0
8.3.11.1
8.3.7.0
8.1.1.0
7.6.1.0
7.5.1.0
6.3.1.0
Usage Information
If you do not use the ge or le options, only packets with an exact match to the prefix are filtered.

show config

Display the current PREFIX-LIST configurations.
Syntax show config
Command Modes PREFIX-LIST
Enter the keyword permit to configure a filter to forward packets meeting this
condition.
(OPTIONAL) Enter the keyword any to match any packets.
(OPTIONAL) Specify an IP prefix in the network/length format. For example, 35.0.0.0/8
means match the first 8 bits of address 35.0.0.0.
(OPTIONAL) Enter the keyword ge and then enter the minimum prefix length, which is a
number from zero (0) to 32.
number from zero (0) to 32.
Enter the keyword bitmask then enter a bit mask number in dotted decimal format.
Description
Introduced on the S6100-ON.
Introduced on the Z9100–ON.
Introduced on the S4048-ON.
Introduced on the S3048-ON.
Introduced on the S6000–ON.
Introduced on the Z9500.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the E-Series.
Introduced on the S-Series.
Introduced on the C-Series.
Added the bit mask option.
Access Control Lists (ACL) 257