Clear Isis - Dell S6100 Configuration Manual

Version
9.8(0.0P5)
9.8(0.0P2)
9.7(0.0)
9.5(0.1)
9.0.2.0
8.3.19.0
8.3.11.1
8.3.7.1
Usage Information

clear isis

Restart the IS-IS process. All IS-IS data is cleared.
Syntax clear isis [vrf vrf-name] [tag] {* | database | traffic}
Parameters
vrf vrf-name
tag
*
database
traffic
Command Modes EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version
9.10(0.0)
9.8(1.0)
9.8(0.0P5)
9.7(0.0)
9.5(0.1)
Description
Introduced on the S4048-ON.
Introduced on the S3048-ON.
Introduced on the S6000-ON.
Introduced on the Z9500.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
CAUTION: Use caution when you enter this command. Back up your configuration prior to using this
command or your IS-IS configuration will be erased.
(Optional) Enter the keyword vrf followed by the name of the VRF to restart the IS-IS
process corresponding to that VRF.
(Optional) Enter an alphanumeric string to specify the IS-IS routing tag area.
Enter the keyword * to clear all IS-IS information and restart the IS-IS process. This
command removes IS-IS neighbor information and IS-IS LSP database information and
the full SPF calculation is done.
Clears IS-IS LSP database information.
Clears IS-IS counters.
Description
Introduced on the S6100–ON.
Introduced on the Z9100–ON.
Introduced on the S4048-ON.
Added support for VRF. Introduced on the S6000–ON.
Introduced on the Z9500.
Intermediate System to Intermediate System (IS-IS) 839