Show Ip Bgp Filter-List - Dell S6100 Configuration Manual

Usage Information
To view the total number of COMMUNITY attributes found, use the show ip bgp summary command. The
text line above the route table states the number of COMMUNITY attributes found.
The show ip bgp community command without any parameters lists BGP routes with at least one BGP
community attribute and the output is the same as for the show ip bgp command output.
Example
Dell# show run extcommunity-list
!
ip extcommunity-list ecl1
permit rt 100:4
permit soo 40:4
Dell#show ip bgp extcommunity-list ecl1
BGP local RIB : Routes to be Added 0, Replaced 0, Withdrawn 0
BGP local router ID is 192.168.11.5
Status codes: s suppressed, S stale, d dampened, h history, * valid, > best
Path source: I - internal, a - aggregate, c - confed-external, r - redistributed
Origin codes: i - IGP, e - EGP, ? - incomplete
*>
*>
Dell#show ip bgp extcommunity-list ec
% Error: Extended community list does not exist.
Dell#

show ip bgp filter-list

View the routes that match the filter lists.
Syntax show ip bgp [vrf vrf-name] [ipv4 {multicast | unicast} | ipv6 unicast] filter-
list as-path-name
Parameters
vrf vrf-name
ipv4 multicast
ipv4 unicast
ipv6 unicast
as-path-name
Command Modes
•
•
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version
9.10(0.0)
n - network,
Network Next Hop
55.0.0.0/24 172.16.0.2
77.0.0.0/24 172.16.0.2
(OPTIONAL) Enter the keyword vrf and then the name of the VRF to view route
information that matches the filter lists corresponding to that VRF.
(OPTIONAL) Enter the keyword ipv4 followed by the keyword multicast to view
information related only to ipv4 multicast routes.
(OPTIONAL) Enter the keyword ipv4 followed by the keyword unicast to view
information related only to ipv4 unicast routes.
(OPTIONAL) Enter the keyword ipv6 followed by the keyword unicast to view
information related only to ipv6 unicast routes.
Enter an AS-PATH access list name. The range is 140 characters.
EXEC
EXEC Privilege
Description
Introduced on the S6100-ON.
D - denied, S - stale
Metric LocPrf Weight Path
0 200 i
0 200 i
Border Gateway Protocol 427