Dell S6100 Configuration Manual page 1120

Version
7.8.1.0
7.6.1.0
7.5.1.0
pre-6.1.1.1
Usage Information The following describes the show ip ospf process-id database external command shown in the
following example.
Field
LS Age
Options
LS Type
Link State ID
Advertising Router
LS Seq Number
Checksum
Length
Network Mask
Metrics Type
TOS
Metric
Forward Address
External Route Tag
Example
Dell# show ip ospf 1 database external
LS age: 612
Options: (No TOS-capability, No DC, E)
LS type: Type-5 AS External
Link State ID: 12.12.12.2
Advertising Router: 20.31.3.1
LS Seq Number: 0x80000007
Checksum: 0x4cde
1120 Open Shortest Path First (OSPFv2 and OSPFv3)
Description
Added support for Multi-Process OSPF.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
Description
Displays the LSA's age.
Displays the optional capabilities available on router. The following options can be found in
this item:
• TOS-capability or No TOS-capability is displayed depending on whether the router
can support Type of Service.
• DC or No DC is displayed depending on whether the originating router can support
OSPF over demand circuits.
• E or No E is displayed on whether the originating router can accept AS External LSAs.
Displays the LSA's type.
Displays the Link State ID.
Identifies the router ID of the LSA's originating router.
Identifies the link state sequence number. This number enables you to identify old or
duplicate LSAs.
Displays the Fletcher checksum of the LSA's complete contents.
Displays the length in bytes of the LSA.
Displays the network mask implemented on the area.
Displays the external type.
Displays the Type of Service (TOS) options. Option 0 is the only option.
Displays the LSA metric.
Identifies the address of the forwarding router. Data traffic is forwarded to this router. If
the forwarding address is 0.0.0.0, data traffic is forwarded to the originating router.
Displays the 32-bit field attached to each external route. The OSPF protocol does not use
this field, but you can use the field for external route management.
OSPF Router with ID (20.20.20.5) (Process ID 1)
Type-5 AS External