Advertise Med Power-Via-Mdi - Dell S6100 Configuration Manual

Usage Information
•
•
Related Commands
•
•

advertise med power-via-mdi

To advertise the Extended Power via MDI TLV, configure the system.
Syntax advertise med power-via-mdi
To return to the default, use the no advertise med power-via-mdi command.
Defaults unconfigured.
Command Modes CONFIGURATION (conf-lldp)
Command History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.10(0.0)
9.8(1.0)
9.8(0.0P5)
9.8(0.0P2)
9.7(0.0)
9.2(1.0)
9.0.2.0
8.3.19.0
8.3.11.1
8.3.7.0
7.7.1.0
7.6.1.0
Usage Information Advertise the Extended Power via MDI on all ports that are connected to an 802.3af powered, LLDP-MED
endpoint device.
972 Link Layer Discovery Protocol (LLDP)
ECS — Emergency call service such as defined by TIA or the national emergency numbering association
(NENA)
ELIN — Emergency location identification number, a valid North America Numbering Plan format telephone
number supplied for ECS purposes.
debug lldp interface — debug LLDP.
show lldp neighbors — display the LLDP neighbors.
Description
Introduced on the S6100–ON.
Introduced on the Z9100–ON.
Introduced on the S4048-ON.
Introduced on the S3048-ON.
Introduced on the S6000-ON.
Introduced on the Z9500.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.