Interface Port-Channel - Dell S6100 Configuration Manual

Version
8.3.19.0
8.3.11.1
8.3.7.0
8.1.1.0
7.6.1.0
Related Commands
•
•

interface port-channel

Create a Port Channel interface, which is a link aggregation group (LAG) containing 16 physical interfaces on the S-Series.
Syntax interface port-channel channel-number
To delete a Port Channel, use the no interface port-channel channel-number command.
Parameters
channel-number
Defaults Not configured.
Command Modes CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version
9.10(0.0)
9.8(1.0)
9.8(0.0P5)
9.8(0.0P2)
9.7(0.0)
9.2(1.0)
9.0.2.0
8.3.19.0
8.3.12.0
8.3.11.1
8.1.1.0
7.6.1.0
7.5.1.0
Description
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the E-Series.
Introduced on the C-Series, E-Series, and S-Series.
port-channel failover-group
group.
show interfaces port-channel
For a Port Channel interface, enter the keywords port-channel then a number. The
range is from 1 to 4096.
Description
Increased the number of port channels to 4096. Introduced on the S6100–ON.
Introduced on the Z9100–ON.
Introduced on the S4048-ON.
Introduced on the S3048-ON.
Introduced on the S6000-ON.
Introduced on the Z9500.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on S4810.
Introduced on Z9000.
Introduced on E-Series.
Introduced on S-Series.
Introduced on C-Series.
— access PORT-CHANNEL FAILOVER-GROUP mode to configure a LAG failover
— display information on configured Port Channel groups.
Interfaces 731