Ip Igmp Version - Dell S6100 Configuration Manual

ip igmp version

Manually set the version of the router to IGMPv2 or IGMPv3.
Syntax ip igmp version {2 | 3}
Parameters
2
3
Defaults 2 (IGMPv2)
Command Modes INTERFACE
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version
9.10(0.0)
9.8(1.0)
9.8(0.0P5)
9.8(0.0P2)
9.7(0.0)
9.5(0.0)
9.0.2.0
9.2(0.0)
8.3.19.0
8.3.11.1
8.3.7.0
7.8.1.0
7.7.1.0
7.5.1.0
646 Internet Group Management Protocol (IGMP)
Enter the number 2 to set the IGMP version number to IGMPv2.
Enter the number 3 to set the IGMP version number to IGMPv3.
Description
Introduced on the S6100–ON.
Introduced on the Z9100–ON.
Introduced on the S4048-ON.
Introduced on the S3048-ON.
Changed the default IGMP from version 2 to version 3. Introduced on the S6000-ON
Introduced on the Z9500.
Introduced on the S6000.
Introduced on the M I/O Aggregator. This command is supported in Programmable-Mux
(PMUX) mode only.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.