Dell S6100 Configuration Manual page 430

•
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version
9.10(0.0)
9.8(1.0)
9.8(0.0P5)
9.8(0.0P2)
9.7(0.0)
9.4.(0.0)
9.2(1.0)
9.0.2.0
8.3.19.0
8.3.11.1
8.3.7.0
7.8.1.0
7.7.1.0
Usage Information
The following describes the show ip bgp flap command shown in the following example.
Field
Network
From
Flaps
Duration
Reuse
Path
Example
Dell# show ip bgp flap-statistics
BGP local RIB : Routes to be Added 0, Replaced 0, Withdrawn 0
BGP local router ID is 192.168.11.5
Status codes: s suppressed, S stale, d dampened, h history, * valid, > best
Path source: I - internal, a - aggregate, c - confed-external, r - redistributed
Origin codes: i - IGP, e - EGP, ? - incomplete
h
d
*>
*>n 66.66.77.77/32
Dell#
430 Border Gateway Protocol
EXEC Privilege
Description
Introduced on the S6100-ON.
Introduced on the Z9100–ON.
Introduced on the S4048-ON.
Introduced on the S3048-ON.
Added the ipv4 multicast and ipv6 unicast parameters.
Added support for VRF.
Introduced on the Z9500.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Description
Displays the network ID to which the route is flapping.
Displays the IP address of the neighbor advertising the flapping route.
Displays the number of times the route flapped.
Displays the hours:minutes:seconds since the route first flapped.
Displays the hours:minutes:seconds until the flapped route is available.
Lists all the ASs the flapping route passed through to reach the destination network.
n - network,
Network From
77.0.0.0/24 172.16.0.2
55.0.0.0/24 172.16.0.2
66.0.0.0/24 172.16.0.2
0.0.0.0
D - denied, S - stale
Flaps
1
3
1
0 32768 i
Duration Reuse
00:00:03 00:00:00
00:00:25 00:30:44 200 i
00:00:23 00:00:00 200 i
Path