Maximum-Paths - Dell S6100 Configuration Manual

Command Modes ROUTER BGP
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version
9.10(0.0)
9.8(1.0)
9.8(0.0P5)
9.8(0.0P2)
9.7(0.0)
9.2(1.0)
9.0.2.0
8.3.19.0
8.3.11.1
8.3.7.0
7.8.1.0
7.7.1.0
pre-7.7.1.0
Related Commands
•

maximum-paths

Configure the maximum number of parallel routes (multipath support) BGP supports.
Syntax maximum-paths {ebgp | ibgp} number
To return to the default values, enter the no maximum-paths command.
Parameters
ebgp
ibgp
number
Defaults none
Command Modes ROUTER BGP
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
376 Border Gateway Protocol
Description
Introduced on the S6100-ON.
Introduced on the Z9100–ON.
Introduced on the S4048-ON.
Introduced on the S3048-ON.
Introduced on the S6000–ON.
Introduced on the Z9500.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced.
router bgp — enter ROUTER mode on the switch.
Enter the keyword ebgp to enable multipath support for External BGP routes.
Enter the keyword ibgp to enable multipath support for Internal BGP routes.
Enter a number as the maximum number of parallel paths.