Show Ipv6 Dhcp Snooping - Dell S6100 Configuration Manual

permit vlan 10 host 1.1.1.2 host 00:00:00:00:01:02
permit vlan 10 host 1.1.1.3 host 00:00:00:00:01:03
ipmac-vlan sav access-list on Port-channel 10 on stack-unit 2
Total cam count 5
permit host 0.0.0.0 host 00:00:00:00:00:00
permit vlan 10 host 1.1.1.1 host 00:00:00:00:01:01
permit vlan 10 host 1.1.1.2 host 00:00:00:00:01:02
permit vlan 10 host 1.1.1.3 host 00:00:00:00:01:03
ipmac-vlan sav access-list on Port-channel 10 on stack-unit 3
Total cam count 5
permit host 0.0.0.0 host 00:00:00:00:00:00
permit vlan 10 host 1.1.1.1 host 00:00:00:00:01:01
permit vlan 10 host 1.1.1.2 host 00:00:00:00:01:02
permit vlan 10 host 1.1.1.3 host 00:00:00:00:01:03
The following example displays the SAV discard counters on all interfaces:
Dell> show ip dhcp snooping source-address-validation discard-counters
deny access-list on TenGigabitEthernet 1/1/1/1
Total cam count 1
deny count (0 packets)
deny access-list on TenGigabitEthernet 1/1/1/2/
Total cam count 2
deny vlan 10 count (0 packets)
deny vlan 20 count (0 packets)
The following example displays the SAV discard counters on a particular interface:
Dell> show ip dhcp snooping source-address-validation discard-counters
interface TenGigabitEthernet 1/1/1/1
deny access-list on TenGigabitEthernet 1/1/1/1
Total cam count 2
deny vlan 10 count (0 packets)
deny vlan 20 count (0 packets)
The following example displays the SAV discard counters on a port channel interface:
Dell> show ip dhcp snooping source-address-validation discard-counters
interface portchannel 10
deny access-list on Port-channel 10 on stack-unit 1
Total cam count 1
deny vlan 10 count (0 packets)
deny access-list on Port-channel 10 on stack-unit 2
Total cam count 1
deny vlan 10 count (0 packets)
deny access-list on Port-channel 10 on stack-unit 3
Total cam count 1
deny vlan 10 count (0 packets)

show ipv6 dhcp snooping

Display the DHCPv6 snooping binding database.
Syntax show ipv6 dhcp snooping
Defaults None
Command Modes EXEC Privilege
576 Dynamic Host Configuration Protocol (DHCP)
NOTE: The output for port-channel interfaces does not display the physical interface.
NOTE: The output for port-channel interfaces does not display the physical interface. If the LAG
member interfaces belong to different stack-units, the counters are displayed per stack-unit for that
port channel.
count (0 packets)
count (0 packets)
count (0 packets)
count (0 packets)
count (0 packets)
count (0 packets)
count (0 packets)
count (0 packets)
count (0 packets)
count (0 packets)