Ipv6 Ospf Authentication - Dell S6100 Configuration Manual

area area-id
Defaults None
Command Modes INTERFACE
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version
9.10(0.0)
9.8(1.0)
9.8(0.0P5)
9.8(0.0P2)
9.2(1.0)
9.1.(0.0)
8.3.19.0
7.4.1.0

ipv6 ospf authentication

Configure an IPsec authentication policy for OSPFv3 packets on an IPv6 interface.
Syntax ipv6 ospf authentication {null | ipsec spi number {MD5 | SHA1} [key-encryption-
type] key}}
Parameters
null
ipsec spi number
MD5 | SHA1
key-encryption-
type
key
Specify the OSPF area. The range is from 0 to 65535.
Description
Introduced on the S6100-ON.
Introduced on the Z9100-ON.
Introduced on the S4048-ON.
Introduced on the S3048-ON.
Introduced on the Z9500.
Introduced on the S4810 and Z9000.
Introduced on the S4820T.
Introduced on the E-Series and C-Series.
Causes an authentication policy configured for the area to not be inherited on the
interface.
Security Policy index (SPI) value that identifies an IPsec security policy. The range is from
256 to 4294967295.
Authentication type: Message Digest 5 (MD5) or Secure Hash Algorithm 1 (SHA-1).
(OPTIONAL) Specifies if the key is encrypted.
Valid values: 0 (key is not encrypted) or 7 (key is encrypted).
Text string used in authentication.
For MD5 authentication, the key must be 32 hex digits (non-encrypted) or 64 hex digits
(encrypted).
Open Shortest Path First (OSPFv2 and OSPFv3) 1161