Dell S6100 Configuration Manual page 1174

metric-type type-
value
route-map map-
name
tag tag-value
Defaults Not configured.
Command Modes
ROUTER OSPF for OSPFv2
ROUTER OSPFv3 for OSPFv3
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version
9.10(0.0)
9.8(1.0)
9.8(0.0P5)
9.8(0.0P2)
9.2(1.0)
9.1.(0.0)
8.3.19.0
7.8.1.0
7.4.1.0
Usage Information
To redistribute the default route (x:x:x:x::x), use the default-information originate command.
Related Commands
•
1174 Open Shortest Path First (OSPFv2 and OSPFv3)
(OPTIONAL) Enter the keywords metric-type then the OSPFv3 link state type of 1 or
2 for default routes. The values are:
• 1 for a type 1 external route
• 2 for a type 2 external route
The default is 2.
(OPTIONAL) Enter the keywords route-map then the name of an established route
map. If the route map is not configured, the default is deny (to drop all routes).
(OPTIONAL) Enter the keyword tag to set the tag for routes redistributed into OSPFv3.
The range is from 0 to 4294967295
The default is 0.
Description
Introduced on the S6100-ON.
Introduced on the Z9100-ON.
Introduced on the S4048-ON.
Introduced on the S3048-ON.
Introduced on the Z9500.
Introduced support for OSPFv3 on the S4810 and Z9000.
Introduced on the S4820T.
Added support for the C-Series.
Introduced on the E-Series.
default-information originate – configure default external route into OSPFv3.