Usage
Retries are 20 seconds apart.
Information
Related
show arp retries
Commands
arp timeout
Set the time interval for an ARP entry to remain in the ARP cache.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax
arp timeout minutes
Parameters
seconds
Defaults
240 minutes (4 hours)
Command Modes
INTERFACE
Command History
Version 8.3.11.1
Version 8.3.7.0
Version 8.1.1.0
Version 7.6.1.0
Version 7.5.1.0
pre-Version
6.2.1.1
Related
show interfaces
Commands
clear arp-cache
Clear the dynamic ARP entries from a specific interface or optionally delete (no-refresh) ARP entries from the
content addressable memory (CAM).
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax
clear arp-cache [vrf name | interface | ip ip-address] [no-
refresh]
772
– displays the configured number of ARP retries.
Enter the number of minutes. The range is 0 to 35790. The default is
240 minutes.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the E-Series ExaScale.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
– displays the ARP timeout value for all available interfaces.