Feature Fip-Snooping - Dell S6100 Configuration Manual

Command Modes EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version
9.10(0.0)
9.8(0.0)
9.7(0.0)
9.2(0.2)

feature fip-snooping

Enable FCoE transit and FIP snooping on a switch.
Syntax feature fip-snooping
To disable the FCoE transit feature, use the no feature fip-snooping command.
Defaults Disabled
Command Modes CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version
9.10(0.0)
9.8(1.0)
9.8(0.0)
9.7(0.0)
598 FIP Snooping
• For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet then
the stack/slot/port/subport information.
• For a 25-Gigabit Ethernet interface, enter the keyword twentyFiveGigE then the
stack/slot/port/subport information.
• For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE then the stack/
slot/port[/subport] information.
• For a 50-Gigabit Ethernet interface, enter the keyword fiftyGigE then the stack/
slot/port/subport information.
• For a 100-Gigabit Ethernet interface, enter the keyword hundredGigE then the
stack/slot/port information.
• For a port channel interface, enter the keywords port-channel then a number.
Description
Introduced on the S6100–ON.
Introduced on the S3048-ON and S4048-ON.
Introduced on the Z9500 and S6000-ON.
Introduced on the S4810 and S4820T. Added the receive parameters packet-type and
interfaces and their options.
Description
Introduced on the S6100–ON.
Introduced on the Z9100–ON.
Introduced on the S3048-ON and S4048-ON.
Introduced on the S6000-ON.