Dell S6100 Configuration Manual page 256

Parameters
prefix-name
Command Modes CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version
9.10(0.0)
9.8(1.0)
9.8(0.0P5)
9.8(0.0P2)
9.7(0.0)
9.2(1.0)
9.0.2.0
8.3.19.0
8.3.11.1
8.3.7.0
8.1.1.0
7.8.1.0
7.6.1.0
7.5.1.0
6.2.1.1
Usage Information Prefix lists redistribute OSPF and RIP routes meeting specific criteria.
Related Commands
•
•
seq
To a deny or permit filter in a prefix list while configuring the filter, assign a sequence number.
Syntax seq sequence-number {deny | permit} {any} | [ip-prefix /nn {ge min-prefix-
length} {le max-prefix-length}] | [bitmask number]
To delete a specific filter, use the no seq sequence-number {deny | permit} {any} | [ip-
prefix {ge min-prefix-length} {le max-prefix-length}] | [bitmask number].
Parameters
sequence-number
deny
256 Access Control Lists (ACL)
Enter a string up to 16 characters long as the name of the prefix list, up to 140 characters
long.
Description
Introduced on the S6100-ON.
Introduced on the Z9100–ON.
Introduced on the S4048-ON.
Introduced on the S3048-ON.
Introduced on the S6000–ON.
Introduced on the Z9500.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the E-Series.
Increased the name string to accept up to 140 characters. Prior to 7.8.1.0, names are up to
16 characters long.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
show ip route list — display IP routes in an IP prefix list.
show ip prefix-list summary
Enter a number. The range is from 1 to 4294967294.
Enter the keyword deny to configure a filter to drop packets meeting this condition..
— display a summary of the configured prefix lists.