Show Ip Interface - Dell S6100 Configuration Manual

Hide thumbs Also See for S6100:

Table of Contents

show ip interface

View IP-related information on all interfaces.

show ip interface [interface | brief] [configured]

Command Modes

Command History

This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking

OS Command Line Reference Guide.

Enter the following keywords and the interface information:

For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet then

the stack/slot/port/subport information.

For a 25-Gigabit Ethernet interface, enter the keyword twentyFiveGigE then the

stack/slot/port/subport information.

For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE then the stack/

slot/port[/subport] information.

For a 50-Gigabit Ethernet interface, enter the keyword fiftyGigE then the stack/

slot/port/subport information.

For a 100-Gigabit Ethernet interface, enter the keyword hundredGigE then the

stack/slot/port information.

For a Loopback interface, enter the keyword loopback then a number from 0 to

For the Management interface on the stack-unit, enter the keyword

ManagementEthernet then the slot/port information.

For a port channel interface, enter the keywords port-channel then a number.

For a Null interface, enter the keyword null then the Null interface number.

For a VLAN interface, enter the keyword vlan then a number from 1 to 4094.

For a stack-unit interface, enter the keyword stack-unit then the stack unit

For a tunnel interface, enter the keyword tunnel then the tunnel interface number.

The range is from 1 to 16383.

(OPTIONAL) Enter the keyword brief to view a brief summary of the interfaces and

whether an IP address is assigned.

(OPTIONAL) Enter the keyword configured to display the physical interfaces with

non-default configurations only.

EXEC Privilege

Updated the command output to include the unicast reverse path forwarding (uRPF)

IPv4 Routing

Table of Contents