Gvrp Registration - Dell S6100 Configuration Manual

Version
9.7(0.0)
9.2(1.0)
9.0.2.0
8.3.19.0
8.3.11.1
8.3.7.0
7.6.1.0
Related Commands
•

gvrp registration

Configure the GVRP register type.
Syntax gvrp registration {fixed | normal | forbidden}
To return to the default, use the gvrp register normal command.
Parameters
fixed
normal
forbidden
Defaults normal
Command Modes CONFIGURATION-INTERFACE
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version
9.10(0.0)
9.8(1.0)
9.8(0.0P5)
9.8(0.0P2)
9.7(0.0)
9.2(1.0)
9.0.2.0
628 GARP VLAN Registration (GVRP)
Description
Introduced on the S6000–ON.
Introduced on the Z9500.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on C-Series, E-Series, and S-Series
disable — globally disable GVRP.
Enter the keyword fixed then the VLAN range in a comma-separated VLAN ID set.
Enter the keyword normal then the VLAN range in a comma-separated VLAN ID set.
This setting is the default.
Enter the keyword forbidden then the VLAN range in a comma-separated VLAN ID
set.
Description
Introduced on the S6100–ON.
Introduced on the Z9100–ON.
Introduced on the S4048-ON.
Introduced on the S3048-ON.
Introduced on the S6000–ON.
Introduced on the Z9500.
Introduced on the S6000.