Related Commands
•
•
advertise med voice-signaling
To advertise when voice control packets use a separate network policy than voice data, configure the system.
Syntax
advertise med voice-signaling {vlan-id layer2_priority DSCP_value} | {priority-
tagged number}
To return to the default, use the no advertise med voice-signaling {vlan-id layer2_priority
DSCP_value} | {priority-tagged number} command.
Parameters
vlan-id
layer2_priority
DSCP_value
priority-tagged
number
Defaults
Unconfigured.
Command Modes
CONFIGURATION (conf-lldp)
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version
9.10(0.0)
9.8(1.0)
9.8(0.0P5)
9.8(0.0P2)
9.7(0.0)
9.0.2.0
8.3.19.0
8.3.11.1
8.3.7.0
7.7.1.0
7.6.1.0
Related Commands
•
978
Link Layer Discovery Protocol (LLDP)
debug lldp interface
— de bug LLDP.
show lldp neighbors
— display the LLDP neighbors.
Enter the VLAN ID. The range is from 1 to 4094.
Enter the Layer 2 priority. The range is from 0 to 7.
Enter the DSCP value. The range is from 0 to 63.
Enter the keywords priority-tagged, the Layer 2 priority, and then the DSCP value.
Description
Introduced on the S6100–ON.
Introduced on the Z9100–ON.
Introduced on the S4048-ON.
Introduced on the S3048-ON.
Introduced on the S6000-ON.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series and E-Series.
debug lldp interface
— debug LLDP.