Show Isis Database - Dell S6100 Configuration Manual

spf-interval level-2 120 20 25
exit-address-family

show isis database

Display the IS-IS link state database.
Syntax show isis [vrf vrf-name] database [level-1 | level-2] [local] [detail |
summary] [system-id] [lspid]
Parameters
vrf vrf-name
level-1
level-2
local
detail
summary
lspid
system-id
Command Modes
•
•
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version
9.10(0.0)
9.8(1.0)
9.8(0.0P5)
9.8(0.0P2)
9.7(0.0)
9.5(0.1)
9.2(0.2)
9.0.2.0
8.3.19.0
890 Intermediate System to Intermediate System (IS-IS)
(Optional) Enter the keyword vrf followed by the name of the VRF to display IS-IS link
state database corresponding to that VRF.
NOTE:
corresponding to the default VRF are displayed.
(OPTIONAL) Displays the Level 1 IS-IS link-state database.
(OPTIONAL) Displays the Level 2 IS-IS link-state database.
(OPTIONAL) Displays local link-state database information.
(OPTIONAL) Displays the detailed link-state database information of each LSP when
specified. If not specified, a summary displays.
(OPTIONAL) Displays the summary of link-state database information when specified.
(OPTIONAL) Display only the specified LSP.
(OPTIONAL) Displays the link-state database for system-id.
EXEC
EXEC Privilege
Description
Introduced on the S6100-ON.
Introduced on the Z9100-ON.
Introduced on the S4048-ON.
Introduced on the S3048-ON.
Added supported for VRF. Introduced on the S6000-ON.
Introduced on the Z9500.
Introduced on the Z9000.
Introduced on the S6000.
Introduced on the S4820T.
If you do not specify this option, the IS-IS link state database