Show Ip Bgp Community-List - Dell S6100 Configuration Manual

Origin codes: i - IGP, e - EGP, ? - incomplete
*>
*>
Dell# show ip bgp community no-advertise
BGP local RIB : Routes to be Added 0, Replaced 0, Withdrawn 0
BGP local router ID is 192.168.11.5
Status codes: s suppressed, S stale, d dampened, h history, * valid, > best
Path source: I - internal, a - aggregate, c - confed-external, r - redistributed
Origin codes: i - IGP, e - EGP, ? - incomplete
*>
Dell#

show ip bgp community-list

View routes that a specific community list affects.
Syntax show ip bgp [vrf vrf-name] [ipv4 {unicast | multicast} | ipv6 unicast]
community-list community-list-name [exact-match]
Parameters
vrf vrf-name
ipv4 unicast
ipv4 multicast
ipv6 unicast
community-list-
name
exact-match
Command Modes
•
•
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version
9.10(0.0)
9.8(1.0)
9.8(0.0P5)
9.8(0.0P2)
n - network,
Network Next Hop
55.0.0.0/24 172.16.0.2
66.0.0.0/24 172.16.0.2
n - network,
Network Next Hop
66.0.0.0/24 172.16.0.2
(OPTIONAL) Enter the keywords vrf and then the name of the VRF to view routes
affected by a specific community list corresponding to that VRF.
(OPTIONAL) Enter the keywords ipv4 unicast to view information only related to
ipv4 unicast routes.
(OPTIONAL) Enter the keyword ipv4 followed by the keyword multicast to view
information related only to ipv4 multicast routes.
(OPTIONAL) Enter the keyword ipv6 followed by the keyword unicast to view
information related only to ipv6 unicast routes.
Enter the name of a configured IP community list (maximum 140 characters).
Enter the keyword for an exact match of the communities.
EXEC
EXEC Privilege
Description
Introduced on the S6100-ON.
Introduced on the Z9100–ON.
Introduced on the S4048-ON.
Introduced on the S3048-ON.
D - denied, S - stale
Metric
D - denied, S - stale
Metric
LocPrf Weight Path
0 200 i
0 200 i
LocPrf Weight Path
0 200 i
Border Gateway Protocol 421