Clear Gvrp Statistics - Dell S6100 Configuration Manual

Topics:
•

clear gvrp statistics

• debug gvrp
• disable
• garp timers
• gvrp enable
• gvrp registration
• protocol gvrp
• show config
• show garp timers
• show gvrp
• show gvrp statistics
clear gvrp statistics
Clear GVRP statistics on an interface.
Syntax clear gvrp statistics interface interface
Parameters
interface interface
Defaults None
Command Modes EXEC
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version
9.10(0.0)
9.8(1.0)
9.8(0.0P5)
Enter the following keywords and the interface information:
• For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet then
the stack/slot/port/subport information.
• For a 25-Gigabit Ethernet interface, enter the keyword twentyFiveGigE then the
stack/slot/port/subport information.
• For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE then the stack/
slot/port[/subport] information.
• For a 50-Gigabit Ethernet interface, enter the keyword fiftyGigE then the stack/
slot/port/subport information.
• For a 100-Gigabit Ethernet interface, enter the keyword hundredGigE then the
stack/slot/port information.
• For a port channel interface, enter the keywords port-channel then a number.
Description
Introduced on the S6100–ON.
Introduced on the Z9100–ON.
Introduced on the S4048-ON.
GARP VLAN Registration (GVRP) 623