Show Lacp - Dell S6100 Configuration Manual

show lacp

Display the LACP matrix.
Syntax show lacp port-channel-number [sys-id | counters]
Parameters
port-channel-
number
sys-id
counters
Defaults Without a Port Channel specified, the command clears all Port Channel counters.
Command Modes
•
•
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version
9.10(0.0)
9.8(1.0)
9.8(0.0P5)
9.8(0.0P2)
9.7(0.0)
9.2(1.0)
9.0.2.0
8.3.19.0
8.3.11.1
8.3.7.0
7.6.1.0
7.5.1.0
6.2.1.1
Example (Port-
Dell# show lacp 1
Channel-Number) Port-channel 1 admin up, oper up, mode lacp
Actor
Partner System ID:Priority 32768, Address 0001.e801.45a5
Enter a port-channel number. The range is from 1 to 4096.
(OPTIONAL) Enter the keywords sys-id and the value that identifies a system.
(OPTIONAL) Enter the keyword counters to display the LACP counters.
EXEC
EXEC Privilege
Description
Introduced on the S6100–ON.
Introduced on the Z9100–ON.
Introduced on the S4048-ON.
Introduced on the S3048-ON.
Introduced on the S6000–ON.
Introduced on the Z9500.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
System ID:Priority 32768, Address 0001.e800.a12b
Actor Admin Key 1, Oper Key 1, Partner Oper Key 1
LACP LAG 1 is an aggregatable link
Link Aggregation Control Protocol (LACP) 917