Show Ip Pim Bsr-Router - Dell S6100 Configuration Manual

infinity
Defaults Not configured.
Command Modes CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version
9.10(0.0)
9.8(1.0)
9.8(0.0P5)
9.8(0.0P2)
9.7(0.0)
9.5(0.1)
8.3.19.0
8.3.12.0
8.1.1.0
Usage Information This command is applicable to last hop routers on the shared tree towards the rendezvous point (RP).

show ip pim bsr-router

View information on the Bootstrap router.
Syntax show ip pim [vrf vrf-name] bsr-router
Parameters
vrf vrf-name
Command Modes
•
•
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
1214 PIM-Sparse Mode (PIM-SM)
NOTE:
VRF.
(OPTIONAL) Enter the keyword infinity to never switch to the source-tree.
Description
Introduced on the S6100-ON.
Introduced on the Z9100-ON.
Introduced on the S4048-ON.
Introduced on the S3048-ON.
Added support for VRF. Introduced on the S6000-ON.
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the S4810.
Introduced on the E-Series.
(OPTIONAL) Enter the keyword vrf followed by the name of the VRF to configure this
setting on VRF.
NOTE:
VRF.
EXEC
EXEC Privilege
Applies to specific VRF if input is provided, else applies to Default
Applies to specific VRF if input is provided, else applies to Default