Advertise Med Location-Identification - Dell S6100 Configuration Manual

•

advertise med location-identification

To advertise a location identifier, configure the system.
Syntax advertise med location-identification {coordinate-based value | civic-based
value | ecs-elin value}
To return to the default, use the no advertise med location-identification {coordinate-
based value | civic-based value | ecs-elin value} command.
Parameters
coordinate-based
value
civic-based value
ecs-elin value
Defaults Unconfigured.
Command Modes CONFIGURATION (conf-lldp)
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version
9.10(0.0)
9.8(1.0)
9.8(0.0P5)
9.8(0.0P2)
9.7(0.0)
9.2(1.0)
9.0.2.0
8.3.19.0
8.3.11.1
8.3.7.0
7.7.1.0
7.6.1.0
show lldp neighbors — display the LLDP neighbors.
Enter the keywords coordinate-based then the coordinated based location in
hexadecimal value of 16 bytes.
Enter the keywords civic-based then the civic based location in hexadecimal format.
The range is from 6 to 255 bytes.
Enter the keywords ecs-elin then the Emergency Call Service (ecs) Emergency
Location Identification Number (elin) numeric location string. The range is from 10 to 25
characters.
Description
Introduced on the S6100–ON.
Introduced on the Z9100–ON.
Introduced on the S4048-ON.
Introduced on the S3048-ON.
Introduced on the S6000-ON.
Introduced on the Z9500.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series and E-Series.
Link Layer Discovery Protocol (LLDP) 971