Clear Ip Bgp Flap-Statistics - Dell S6100 Configuration Manual

Version
9.8(0.0P5)
9.8(0.0P2)
9.2(1.0)
9.0.2.0
8.3.19.0
8.3.11.1
8.3.7.0
7.8.1.0
7.7.1.0
Usage Information After you enter this command, the software deletes the history routes and returns the suppressed routes to the
Active state.
The clear ip bgp dampening command does not clear the history paths.

clear ip bgp flap-statistics

Clear BGP flap statistics, which includes number of flaps and the time of the last flap.
Syntax clear ip bgp [vrf vrf-name] [ipv4 [multicast | unicast] | ipv6 unicast] [flap-
statistics [ipv4-address mask | ipv6–address mask] | filter-list as-path-name |
regexp regular-expression]
Parameters
ipv4-address mask
ipv6–address mask
filter-list as-path-
name
regexp regular-
expression
364 Border Gateway Protocol
Description
Introduced on the S4048-ON.
Introduced on the S3048-ON.
Introduced on the Z9500.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
(OPTIONAL) Enter an IPv4 address in dotted decimal format and the prefix mask in slash
format (/x) to reset only that prefix.
(OPTIONAL) Enter the IPv6 address followed by the network mask to reset only that
prefix.
(OPTIONAL) Enter the keywords filter-list then the name of a configured AS-
PATH list.
(OPTIONAL) Enter the keyword regexp then regular expressions. Use one or a
combination of the following:
• . = (period) any single character (including a white space).
• * = (asterisk) the sequences in a pattern (0 or more sequences).
• + = (plus) the sequences in a pattern (1 or more sequences).
• ? = (question mark) sequences in a pattern (either 0 or 1 sequences).
NOTE: Enter an escape sequence (CTRL+v) prior to entering the ?
regular expression.
• [ ] = (brackets) a range of single-character patterns.
• ( ) = (parenthesis) groups a series of pattern elements to a single element.