Clear Hardware Vlan-Counters - Dell S6100 Configuration Manual

Version
8.3.19.0
8.3.11.0
8.3.7.0
7.8.1.0

clear hardware vlan-counters

Clear VLAN statistics.
Syntax clear hardware vlan-couters vlan-id
Parameters
vlan-id
Defaults None
Command Modes EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version
9.10(0.0)
9.8(1.0)
9.8(0.0P5)
9.8(0.0P2)
9.7(0.0)
9.7(0.0)
hardware watchdog
To trigger a reboot and restart the system, set the watchdog timer.
Syntax hardware watchdog stack-unit {stack-unit-number | all}
Defaults Enabled.
Command Modes CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version
9.10(0.0)
9.8(1.0)
Description
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Enter the interface VLAN number. The range is from 1 to 4094.
Description
Introduced on the S6100-ON.
Introduced on the Z9100–ON.
Introduced on the S4048-ON.
Introduced on the S3048-ON.
Introduced on the S6000-ON.
Introduced this command.
Description
Introduced on the S6100-ON.
Introduced on the Z9100–ON.
Debugging and Diagnostics 515