Dell S6100 Configuration Manual page 1024

Version
8.4.1.1
8.3.19.0
8.3.7.0
7.6.1.0
7.5.1.0
E-Series legacy
command
Example (Static)
Dell# show ip mroute static
Mroute: 23.23.23.0/24, interface: Lo 2
Protocol: static, distance: 0, route-map: none, last change: 00:00:23
Example (Snooping) Dell# show ip mroute snooping
IPv4 Multicast Snooping Table
(*, 224.0.0.0), uptime 17:46:23
(*, 225.1.2.1), uptime 00:04:16
(165.87.1.7, 225.1.2.1), uptime 00:03:17
Example (VLT)
Dell# show ip mroute vlt
IP Multicast Routing Table
Flags: S – Synced
(*, 225.1.1.1), uptime 00:39:33 flags: S
Incoming interface: Vlan 10
Spanned outgoing interface list:
Vlan 20 (S)
Vlan 30
(50.1.1.2, 225.1.1.1), uptime 00:39:33 flags: S
Incoming interface: Vlan 10
Spanned outgoing interface list:
Vlan 20 (S)
Usage Information The following describes the show ip mroute command shown in the following example.
Field
(S, G)
uptime
1024 Multicast
Description
Support for the keyword snooping and the optional vlan vlan-id, group-
address, and source-address parameters were added on E-Series.
Introduced on the S4820T.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Incoming vlan: Vlan 2
Outgoing interface list:
TenGigabitEthernet 1/1/3/1
Incoming vlan: Vlan 2
Outgoing interface list:
TenGigabitEthernet 1/1/1/1
TenGigabitEthernet 1/1/3/1
Incoming vlan: Vlan 2
Outgoing interface list:
TenGigabitEthernet 1/1/1/1
TenGigabitEthernet 1/1/3/1
TenGigabitEthernet 1/1/4/1
Description
Displays the forwarding entry in the multicast route table.
Displays the amount of time the entry has been in the multicast forwarding table.