Network - Dell S6100 Configuration Manual

Version
8.3.7.0
8.2.1.0

network

Specify the range of addresses in an address pool.
Syntax network network /prefix-length
Parameters
network/ prefix-
length
Defaults None
Command Modes DHCP <POOL>
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version
9.10(0.0)
9.8(1.0)
9.8(0.0P5)
9.8(0.0P2)
9.7(0.0)
9.2(1.0)
9.0.2.0
8.3.19.0
8.3.11.1
8.3.7.0
8.2.1.0
552 Dynamic Host Configuration Protocol (DHCP)
Description
Introduced on the S4810.
Introduced on the C-Series and S-Series.
Specify a range of addresses. Prefix-length range is from 17 to 31.
Description
Introduced on the S6100-ON.
Introduced on the Z9100–ON.
Introduced on the S4048-ON.
Introduced on the S3048-ON.
Introduced on the S6000-ON.
Introduced on the Z9500.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the C-Series and S-Series.